Toshiba W7 manual Input Terminal Priority, Inrush Current Suppression Time MS Relay Delay

Input Terminal Priority				Interlock with ST
Input Terminal Priority
Program	Terminal Settings		Input Terminals Other Input	Parameter Type — Selection List
Terminal Priority Selection				Factory Default — Disabled
This parameter is used to allow the Jog or the DC Injection Braking input				Changeable During Run — No
signals to control the ASD when received via the Control Terminal Strip even
though the system is in the Local mode.
With this parameter enabled, a Jog command or a DC Injection Braking
command received from the Control Terminal Strip will receive priority over
commands from the keypad.
See Jog Run Frequency for further information on using the Jog function.
See DC Injection Braking Current for further information on this parameter.
Settings:
Enabled
Disabled
Inrush Current Suppression Time (MS Relay Delay)
Program	Protection Settings		Inrush Time	Parameter Type — Numerical
The startup inrush current may be suppressed for up to 2.5 seconds. This				Factory Default — 0.30
parameter⇒determines the length of⇒⇒⇒the inrush current suppression.				Changeable During Run — No
				Minimum — 0.30
				Maximum — 2.50
				Units — Seconds
Integral (I) Gain
Program	Feedback Settings		Integral Gain	Parameter Type — Numerical
This parameter determines the degree that the Integral function affects the				Factory Default — 0.10
output signal when using PID feedback to control the ASD output. The smaller				Changeable During Run — Yes
the value here, the more pronounced the effect of the integral function on the
output signal.				Minimum — 0.01
				Maximum — 100.0
Interlock with ST			⇒Interlock with ST
Program	⇒Protection Settings			Parameter Type — Selection List
The MS1 AUX relay circuit is normally open and is in series with the ST-to-				Factory Default — Disabled
CC connection.				Changeable During Run — Yes
After normal system power is available the MS1 AUX relay circuit closes and
completes the ST-to-CCconnection.
Settings:			⇒
Disabled
Enabled⇒
W7 ASD Installation⇒		and Operation Manual⇒		77