Toshiba W7 manual LCD Contrast, LCD/LED Display Select, LED Option Override Multiplication Gain

LCD Contrast						Low Current Trip
LCD Contrast
Program		Special Control LCD Contrast Setting				Parameter Type — Numerical
Press the Up/Down Arrow keys to increase or decrease the contrast of the LCD						Factory Default — 4
screen.						Changeable During Run — Yes
						Minimum — 0
						Maximum — 7
LCD/LED Display Select
Program		Special Control LCD Contrast Setting				Parameter Type — Selection List
The display type is set using this parameter.						Factory Default — Auto Detect
Settings:						Changeable During Run — No
Auto Detect
LED Display
LCD Display
LED Option Override Multiplication Gain
Program		Protection Settings LED Option Override Multiplication				Parameter Type — Selection List
Gain	⇒			⇒		Factory Default — 0.00
If operating using the LED Keypad Option this parameter provides a value to						Changeable During Run — No
be used in the event that Setting is selected for the Multiplying Input
Selection.						Minimum — -100.00
						Maximum — 100.00
Lock-on Rate
Program		Protection Settings			Lock-on Rate	Parameter Type — Numerical
After a momentary⇒			power outage,⇒the ASD may have to startup into a spinning			Factory Default — 1.00
motor. The Lock-on Rate is the difference between the time that the RPM of						Changeable During Run — No
the motor is determined by the ASD and the time that the ASD outputs a drive
signal to the motor.						Minimum — 0.50
The Speed Search parameter must be enabled to use this feature.
						Maximum — 2.50
						Units — Seconds
Low Current Trip					⇒Low Current Trip
Program	⇒Protection Settings					Parameter Type — Selection List
This parameter Enables/Disables the low-current trip feature.						Factory Default — Disabled
When enabled, the ASD will trip on a low-current fault if the output current of						Changeable During Run — No
the ASD falls below the level defined at the Low Current Setting parameter
for a duration⇒that exceeds the Low⇒Current Time parameter setting.
80	⇒				⇒	W7 ASD Installation and Operation Manual