Qualified Personnel
Installation, operation, and maintenance shall be performed by Qualified Personnel Only. A Qualified Person is one that has the skills and knowledge relating to the construction, installation, operation, and maintenance of the electrical equipment and has received safety training on the hazards involved (Refer to the latest edition of NFPA 70E for additional safety requirements).
Qualified Personnel shall:
•Have carefully read the entire operation manual.
•Be familiar with the construction and function of the ASD, the equipment being driven, and the hazards involved.
•Able to recognize and properly address hazards associated with the application of
•Be trained and authorized to safely energize,
•Be trained in the proper care and use of protective equipment such as safety shoes, rubber gloves, hard hats, safety glasses, face shields, flash clothing, etc., in accordance with established safety practices.
•Be trained in rendering first aid.
For further information on workplace safety visit www.osha.gov.
Equipment Inspection
•Upon receipt of the equipment inspect the packaging and equipment for shipping damage.
•Carefully unpack the equipment and check for parts that may have been damaged during shipping, missing parts, or concealed damage. If any discrepancies are discovered, it should be noted with the carrier prior to accepting the shipment, if possible. File a claim with the carrier if necessary and immediately notify your Toshiba sales representative.
•DO NOT install or energize equipment that has been damaged. Damaged equipment may fail during operation resulting in equipment damage or personal injury.
•Check to see that the rated capacity and the model number specified on the nameplate conform to the order specifications.
•Modification of this equipment is dangerous and must not be performed except by factory trained representatives. When modifications are required contact your Toshiba sales representative.
•Inspections may be required before and after moving installed equipment.
•Keep the equipment in an upright position.
•Contact your Toshiba sales representative to report discrepancies or for assistance if required.
Handling and Storage
•Use proper lifting techniques when moving the ASD; including properly sizing up the load, getting assistance, and using a forklift if required.
•Store in a
•Store in a cool, clean, and dry location. Avoid storage locations with extreme temperatures, rapid temperature changes, high humidity, moisture, dust, corrosive gases, or metal particles.
W7 ASD Installation and Operation Manual | 3 |
