BIN Speed Reference Setpoint #1 |
|
| BIN Torque Reference Reference #2 | ||
|
|
| |||
BIN Speed Reference Setpoint #1 |
|
| |||
Program | Frequency Settings | Speed Reference Setpoints | BIN | Parameter Type — Numerical | |
BIN Speed Reference Setpoint #1 |
| Factory Default — 0.00 | |||
|
|
|
| ||
This parameter is used to set the direction, gain, and bias of the discrete input | Changeable During Run — Yes | ||||
terminals when using the discrete input terminals as the control input while | |||||
| |||||
operating in the Speed Control or the Torque Control mode. |
| Minimum — 0.00 | |||
See BIN Speed Frequency Setpoint #1 for further information on this setting | Maximum — 100.00 | ||||
when used for Speed control. |
|
| |||
|
|
| |||
See BIN Torque Reference Reference #1 for further information on this | Units — % | ||||
| |||||
setting when used for Torque control. |
|
|
| ||
This parameter sets the BIN input that is associated with BIN Speed |
|
| |||
Frequency #1 when operating in the Speed control mode or is associated with |
| ||||
the BIN Torque Reference #1 when operating in the Torque control mode. |
| ||||
This value is entered as 0 to 100% of the binary input word 11111111 (255D). |
| ||||
|
|
| |||
BIN Speed Reference Reference #2 |
|
| |||
Program | Frequency Settings | Speed Reference Setpoints | BIN | Parameter Type — Numerical | |
BIN Speed Reference Setpoint #2 |
| Factory Default — 100.00 | |||
|
|
|
| ||
This parameter is used to set the direction, gain, and bias of the discrete input | Changeable During Run — Yes | ||||
terminals when⇒using the discrete input⇒terminals as the control input ⇒⇒while | |||||
| |||||
operating in the Speed Control or the Torque Control mode. |
| Minimum — 0.00 |
See BIN Speed Frequency Setpoint #1 for further information on this setting | Maximum — 100.0 | |
when used for Speed control. | ||
| ||
See BIN Torque Reference Reference #1 for further information on this | Units — % | |
| ||
setting when used for Torque control. |
| |
This parameter sets the BIN input that is associated with BIN Speed |
| |
Frequency #2 when operating in the Speed control mode or is associated with |
| |
the BIN Torque Reference #2 when operating in the Torque control mode. |
| |
This value⇒is entered as 0 to 100% of⇒the binary input word 11111111⇒⇒(255D). |
|
W7 ASD Installation and Operation Manual | 59 |