NETGEAR WPN111 Default Wireless Configuration Settings, Basic Installation Instructions

User Manual for the NETGEAR RangeMax™ Wireless USB 2.0 Adapter WPN111

Both of these configuration options are available with the RangeMax™ WPN111 Wireless USB

2.0Adapter. Infrastructure configuration procedures for basic network connectivity are covered below. Advanced infrastructure configuration procedures and ad-hoc configuration are covered in Chapter 4, “Configuration” of this manual.

WPN111 Default Wireless Configuration Settings

If this is a new wireless network installation, use the factory default settings to set up the network and verify wireless connectivity. If this is an addition to an existing wireless network, you will need to identify the wireless configuration and security parameters already defined.

Your NETGEAR RangeMax™ Wireless USB 2.0 Adapter WPN111 factory default basic settings are:

•Network Name Service Set Identification (SSID): Any (First available network)

Note: In order for the RangeMax™ WPN111 Wireless USB 2.0 Adapter to communicate with a wireless access point or wireless adapter, all devices must be configured with the same wireless network name (SSID).

•Network Mode (Infrastructure or Ad-hoc): Infrastructure

•Data security WEP encryption: Disabled

The section below provides instructions for setting up the NETGEAR RangeMax™ Wireless USB

2.0Adapter WPN111 for basic wireless connectivity to an access point. The procedures below provide step-by-step installation instructions for Windows PCs. Use the procedure that corresponds to the version of Windows you are using.

Basic Installation Instructions

Use the procedure below that corresponds to the version of Windows you are using.

B a sic S e tu p 3 -3

202-10076-01