My handset keeps going into idle mode!
•If there are no key presses for 30 seconds, the handset will automatically return to idle mode. It will also return to idle mode automatically when you place the handset back on the base station.
Phonebook entry cannot be stored and MEMORY FULL is displayed!
•Delete an entry to free memory before saving your contact again.
The Master PIN code is wrong!
•The default master PIN is 0000.
•If it has been changed before, and you cannot remember the new one, reset the handset to revert to the default master PIN code (see “Reset Unit” in chapter 8.8).
The answering machine does not record messages!
•Memory is full: Delete your old messages.
•The ANSWER ONLY mode has been activated. Deactivate ANSWER ONLY and activate ANSWER & REC. mode (see “Set the Answer mode” in chapter 10.3).
Remote control access does not work!
•Activate Remote Control Access (see “Remote Control Access” in chapter 10.6.2).
The phone hangs up during remote access!
•You have taken more than 8 seconds to enter the Master PIN code. Enter the code again within 8 seconds.
Answering machine stops before the recording is finished!
•Memory is full: Delete your old messages.
Frequently asked questions | 51 |
