ProForm ID555 manual Battery life may be shortened in low temperature conditions, Conformity

•Do not use the product in places where there are explosive hazards.

•Do not let small metal objects come into contact with the product. This can deteriorate audio quality and damage the product.

•Do not allow the charger to come into contact with liquids.

•Active mobile phones in the

vicinity may cause interference. About operating and storage temperatures:

•Operate in a place where temperature is always between 0 and 35º C (32 to 95º F).

•Store in a place where temperature is always between - 20 and 45º C (-4 to 113º F).

•Battery life may be shortened in low temperature conditions.

1.3Conformity

We, Philips declare that the product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. This product can only be connected to the analogue telephone networks of the countries mentioned on the packaging.

You can find the Declaration of Conformity on www.p4c.philips.com.

1.4Using GAP standard

compliance

The GAP standard guarantees that all DECTTM GAP handsets and base stations comply with a minimum

4

operating standard irrespective of their make. Your handset and base station are GAP compliant, which means the minimum guaranteed functions are: register a handset, take the line, receive a call and dial. The advanced features may not be available if you use another handset than an ID555 with your base station. To register and use your ID555 handset with a GAP standard base station of a different make, first follow the procedure described in the manufacturer’s instructions, then follow the procedure described on page 33.

To register a handset of another make to the ID555 base station, place the base station into registration mode (page 33), then follow the procedure in the manufacturer’s instructions.

1.5Recycling and disposal Disposal instructions for old products:

The WEEE directive (Waste Electrical and Electronic Equipment Directive ; 2002/96/EC) has been put in place to ensure that products are recycled using best available treatment, recovery and recycling techniques to ensure human health and high environmental protection. Your product is designed and manufactured with high quality materials and components, which can be recycled and reused.

Do not dispose of your old product in your general household waste bin.

Important