press mSELECT, scroll :to CHANGE PIN and press

mSELECT.

2Enter the current master PIN

when prompted and press mOK to confirm.

The PIN entered will be shown as asterisks (*) on the screen.

3Enter the new PIN and press

mOK.

4Enter the new PIN again and press mOK to confirm PIN change.

A validation tone is emitted and the screen returns to previous menu.

Note

If you forget your PIN, you will need to reset your phone to its default settings. See next section “Reset Unit” for more details.

8.5Registration

If you wish to register an additional handset or if you have inadvertently unregistered your phone handset and want to re-register it, follow the procedure described below. This is the procedure for registering ID555 handsets.The procedures may vary according to the handset you want to register. In this case, please refer to the manufacturer of the additional handset. Additional handsets must be registered to the base unit before you can use them. Up to 5 handsets can be registered to one base station.

The master PIN is required before you can register or unregister handsets.

Note

By default, the master PIN is 0000.

To register your handset manually:

The Master PIN is required before you can register or unregister handsets.

Note

By default, the Master PIN is 0000.

1On the base station, press and hold pfor approximately 5 seconds. The base station emits

a beep when it is ready to accept registration.

2On the handset, press M key, scroll :to ADVANCED SET and press mSELECT, scroll

:to REGISTRATION and press mSELECT.

Note

If no action is taken on the handset within 10 seconds, the registration procedure will be aborted. If this happens, repeat Step 1.

3Enter the Master PIN when prompted and press mOK to confirm.

Note

By default, the Master PIN is 0000.

4WAITING_ _ is displayed on the screen.

Note

If no base is found within a certain period, the handset returns to idle mode.

Advanced settings

33

Page 35
Image 35
ProForm ID555 Mok, To register your handset manually, To Registration and press mSELECT