ProForm ID555 manual Switch between an internal and external call, Paging

Tip

To put the internal call on hold and answer the incoming external call, press rkey.

5.10.4Switch between an internal and external call

To switch between an internal or external call, press ckey.

5.10.5Establish a three-party conference call

The conference call feature allows one external call to be shared with two handsets (in intercom). The three parties can share the conversation and no network subscription is required.

1During the call, press ckey to put the external call on hold (the caller can no longer hear you).

• Intercom is established

immediately if there are only 2 registered handsets.

2 If there are more than 2 registered handsets, the handset numbers which are available for intercom will be displayed. Scroll :to the specific handset you want to call and press mSELECT.

•The called handset rings.

3 Press rkey on the called handset to answer the internal call, where both internal callers can talk.

•Intercom is established.

26

4Press and hold ckey for 2 seconds on the first handset to start the three-party conference.

•CONFERENCE will be displayed on the screen once the conference call is established.

Tip

If CONFERENCE mode is activated (see “Activate/Deactivate Conference mode” on page 31), a three-party conference call is automatically established if the second handset takes the line when there is already an external call in progress.

5.11Paging

The paging feature enables you to locate a missing handset if the handset is in range and contains charged batteries.

1Press pkey on the base station.

•All the registered handsets start to ring.

2Once retrieved, press any key on the handset to end the paging.

Note

If there are no key presses within 30 seconds, the handset and base station will automatically return to idle mode.

Tip

To stop paging, press pkey on the base station again.

Use more of your phone