Technicolor - Thomson AM1550 Clock & Timer, Setting the Clock, Setting the Timer, Sleep Mode

AM1550 EN rev.1 10/29/01 2:17 PM Page 10

Clock&Timer

EN CLOCK

Setting the Clock

3. Shift to minute digits.

1. Turn on the unit.

2.Press CLOCK twice so that the time flashes on the display (24-hour clock).

4.Repeat step 2 to set the minute.

5.Shift to audio select.

6.Select among CD, Tuner or AUX (if available).

CLK --:00

3.Set the hour

4.Shift to minute digits.

5.Repeat step 3 to set the minute.

6.Press CLOCK to save settings.

7.Shift to disc tray or tuner station select.

8.Select disc tray (if CD is

selected) or preset station (if TUNER is selected).

9.Shift to volume select.

10.Select volume level.

	VOL	08dB
Displaying Clock Time

When the unit is off, clock time is always shown on display.

When the unit is on, you can press CLOCK to display the current time for about 5 seconds.

Timer

Setting the Timer

1. Press and hold TIMER until ON and clock time flash on the display ( ON - timer on time ) (24-hour clock).

ON --:12

2. Set the hour.

6

11. Shift to off time select (OFF shows on dis- play). Repeat steps 2-4 for setting off time.

12. Press TIMER again to save setting. (Note: Press TIMER repeatedly to review settings)

Activating the Timer

Press DEMO on the unit to turn on/off the timer.

Sleep Mode

You can select the time interval in minutes before the unit turns off automatically. Press SLEEP on the

remote to select among 120, 105, 90, 75, 60, 45, 30, 15 minutes.