![](/images/new-backgrounds/1217870/217870211x1.webp)
Important notes
–This camera is not waterproof. To avoid dangerous electrical shocks, never hold or operate the camera with wet hands.
–If you use this camera in wet places, such as beach or pool, do not let water or sand get inside the camera. Doing so may result in failure or may permanently damage the unit.
Extremes in temperature may cause problems.
–If the camera is transferred from a cold to a warm and humid environment, condensation can form on the delicate electronic circuitry. If this occurs, turn the camera off and wait for at least 1 hour until all moisture is dispersed. Moisture built up can also occur on the memory card. If this happens, turn off the camera and remove the memory card. Wait until the moisture has dispersed before replacing the card in the camera.
Caution on Using the Lens
–If the lens is subjected to direct sunlight, it could result in the discoloration and deterioration of the image sensor.
–Take care not to get fingerprints or foreign substances on the surface of the lens.
If the digital camera is not used for a long period, an electric discharge can occur. It is a good idea to remove the battery and the memory card if you do not intend using the camera for an extended period of time.
If the camera is exposed to electronic interference, it will turn itself off to protect the memory card.
Camera Maintenance
–Use a soft brush (available from photo stores) to gently clean the lens and LCD assemblies. If this does not work,
Do not attempt to disassemble or modify the camera.
Under certain conditions, static electricity can cause the flash unit to fire. This is not harmful to the camera and is not a malfunction.
When images are uploaded or downloaded, the data transfer may be affected by static electricity. In this case, disconnect and
Before an important event or going on a trip, you should check the camera condition.
–Take a picture for testing the camera condition and prepare extra battery.
–Samsung cannot be held responsible for camera malfunctions.
The temperature of the surface increases if the camera is used for prolonged periods of time. This doesn’t affect the camera operation and is not a problem of the camera.
If the digital camera is not used for a long period, the date and time may adopt the default settings by automatical battery discharged. In this case, reset the date and time correctly before the recording