![](/images/new-backgrounds/1217870/217870121x1.webp)
Using the camera buttons to set the camera
Image enlargement
1.Select the picture you want to enlarge and move
the Digital Zoom lever to the right. Then the selected picture will be digitally enlarged.
2. Different parts of the image can be viewed by pressing the 5 function
The maximum enlargement rate in proportion to the image size
Image size |
|
Maximum | X11.40 X10.10 X9.60 X9.50 X8.10 X6.40 X3.20 |
enlargement rate |
Trimming: You can extract part of the image that you want and save it separately.
button.
x 2.1
3.Move the Thumbnail lever to the left to return the enlarged picture to its original size.
OK Trim
–You can tell whether the image
displayed is an enlarged view by checking the image enlargement indicator shown at the top left of the LCD monitor. (If the image is not an enlarged view, the indicator will not be displayed.) You can also check the area of enlargement.
–Movie clips and WAV files can’t be enlarged.
–If an image is enlarged, a loss of quality may occur.
1. | Select an image that you want to |
| |
| enlarge and press the enlargement |
| |
| button. Press the OK button and a | Trimming? | |
| message will be displayed. | ||
| No | ||
2. | Select a desired sub menu by pressing | ||
Yes | |||
|
the Up/Down button and press the OK |
|
button. | OK Confirm |
–[No]: The trimming menu will disappear.
–[Yes]: The trimmed image will be saved as a new file name, and appear on the LCD monitor.
If there is not enough memory space to save the trimmed image, the image can’t be trimmed.