Inserting the battery
Insert the battery as shown.
– If the camera does not turn on after you have inserted battery, please check whether the battery is inserted with the correct polarity
– When the battery chamber cover is opened, do not force it. This may cause damage to the battery chamber cover.
There are 4 indicators for battery condition that are displayed on the LCD monitor.
Battery |
|
|
|
|
indicator |
|
|
|
|
|
|
|
|
|
|
| Low battery | Low battery |
|
|
| capacity | capacity | Battery empty. |
Battery | The battery is | (Prepare to | (Prepare to | Recharge or |
status | fully charged | recharge or | recharge or | use spare |
|
| use spare | use spare | battery. |
|
| battery) | battery) |
|
|
|
|
|
|
Inserting the memory card
Insert the memory card as shown.
- Turn off the camera’s power before inserting the memory card.
- Have the front label of the memory card facing toward the front of the camera (Lens) and the card pins toward the back of the camera (LCD monitor).
-Do not insert the memory card the wrong way round.
Doing so may damage the memory card slot.