![](/images/new-backgrounds/1217870/21787075x1.webp)
Self-timer (
) / Right button
Motion Timer
In the following cases, the Motion Timer may not operate.
Motion | Icon & | |
|
| |
Pressing the Shutter button after | Blink (1 second interval) | |
setting the Motion Timer |
| |
|
| |
Detecting the subject’s | Blink (0.25 second interval) | |
movement | ||
| ||
|
| |
No movement is detected | Turn on and the image is taken after | |
2 seconds. | ||
|
The Motion Timer flows are as follows.
(with the exception of [Movie] and [Frame Guide] modes)
Selecting the Motion Timer Pressing the Shutter button Confirming the composition (Within 6 sec.)*1 Starting the detection (Swing your hands fully)*2 Stopping the detection (Do not move) Taking an image (after 2 sec.)
The focus distance is over 3m.
The exposure is too bright or dark.
In backlight conditions.
The movement is insignificant.
The movement is detected beyond the center part (50%) of the sensor where the movement is recognized.
If the camera does not detect any movement for 25 seconds or the camera does not detect the pause after recognizing the movement.
1 |
<The detection range of
Motion Timer>
*1: The camera detects the subject’s movement 6 seconds after pressing the Shutter button, so confirm the composition within 6 seconds.
*2: Move your body or hands fully.