Setting the Network
1 The results of port forwarding appear in the UPnP Portmapping Result screen.
- Access the address displayed in the results to be connected with an external network.
- Check the URL or the external access, and click the Close Button.
2 Search the set values again by
| clicking the Search Button on the | |
| bottom of the SNC Installer screen. | |
| - The “Success(W)” is displayed in | |
| the “Status ” if the network is | |
| successfully connected. | |
| - When using wireless Netcam(W), | |
| pull out the LAN cable and close the | |
| cover after settings. | |
| When accessing a local network, use the address displayed as the | |
Note | ||
“Camera ’s address for Local Network Access” of the “UPnP | ||
| ||
| Status.” When accessing an external network, use the address | |
| displayed as “Camera ’s address for Access via Internet.” | |
|
|
UPnP Configuration Screen
1
2
3
4
5
6
7
1.Port Forwarding: Select the method of allocating port numbers. “Disable” means no allocating of port numbers.
“Enable” means auto allocating of port numbers. “User Define” means the user ’s entering port numbers.
2.Display shortcut Icon in My Network Places: Decides whether the Netcam(W) icon will be displayed in the “My Network Environment.”
3.Status: Displays the status of the UPnP. When succeeding, “Success” is displayed. When failing, the “Error” is displayed.
4.External Port No.: Displays the allocated port number.
5.Router Global Address: Displays the Global IP address of the router.
6.Camera ‘s address for Local Network Access: Displays the address with which the user can access the Netcam(W) over the current network.
7.Camera ‘s address for Access via Internet: Displays the address with which the user can access the Netcam(W) via the Internet.
36 | 37 |