Access to Netcam(W) via a cell phone (USA Only)
You can view still images of Netcam(W) by accessing the Internet via a cell phone. Enter http: //Global_IP address (or domain name): port number/wap. htm on the URL page of the cell phone, and press the OK button.
(ex) http://wfffbbb.websamsung.net:8080/wap.htm
-Enter the user name and password when the authorization window appears, and press the OK button.
DISPLAY MODE
< Main Page >
- 160x120
- 320x240
- Help
< Help Page >
Explains camera operations.
- Button 1: Displays the main page.
- Button 2/4/6/8: Controls the Pan/Tilt.
- Button 5: Refreshes still images.
- Button 7: Turns On/Off the flash.
- Button 9: Turns On/off the PIR sensor.
< View and Control Images >
- You can view images without the authorization process when the “Access Limitation Configuration” of the Smart Viewer settings is
Warning set to “Full Access.”
-The authorization process does not appear again after an initial authorization if you store the ID/Password in the cache during mobile phone settings.
-Communication service providers available are listed below (as of August, 2005).
*Cingular
*Sprint
*
-Connection to or control over
72 | 73 |