Samsung SNC-L200(W) user manual Setting the Router or Wireless Router, Setting the Port Forwarding

Page 12

Single Use

Recommended System Specifications

- Computer : Pentium 4/1.5GHz or higher (Pentium 4/1GHz or higher at minimum)

-Operating System : Windows 2000/XP

-Ram : Memory : 256MB or higher

-Video : Memory : 128MB or higher

-Resolution : 1024 X 768 or higher

-Web Browser : Internet Explorer 6.0 or higher

-Video transmission may slow down depending on PC performance or network conditions.

-Do not enter the IP address and Mc address used for illustration in this manual.

Netcam(W)_SNC-L200(W)

Setting the Router or Wireless Router

If you want to connect the PC and the Netcam(W) with a single line of the Internet, you must have an IP router.

You are also required to set the IP router for normal operations.

Installing the IP Router of Wireless Router

Read the user ’s manual before installing the IP router.

-Set the IP address on the IP router.

-The IP address is used to set the network of the Netcam(W).Keep a record of the address for later use.

-The Subnet Mask or the Gateway status of the IP router connection is used to set the network of the Netcam(W). Keep a record of the status for later use.

-A wireless router is required for wireless communication of the NetcamW.

-The wireless information (SSID,WEP etc.)of the wireless router settings is used to set the wireless connection of the NetcamW. Keep a record of the information for later use.

Setting the Port Forwarding

The port forwarding is automatically set when the IP router

(router or wireless router)of the SNC Installer of the Netcam(W) supports UPnP. When the router does not support UPnP, you must set the port number allocated for the Netcam(W) by the IP router. Enter a value between 1 to 65535.

You must not use the following port numbers.

FTP : 21

Telnet : 23

SMTP (E-mail:) : 25

DNS : 53

POP3 : 110

HTTPS : 443

ICQ : 4000

IRC : 6661~6667

 

*It is recommended to set the number to higher than 10,000 since you can prevent collision with port numbers of other Internet service or programs by avoiding commonly used numbers.

IP routers that support UPnP are listed below.

-Netgear WGR614 v5, WGR614 v6

-D-Link DI-624, DI-624+, DI-624+A

-Zio WLB5054IP

23

Image 12
Contents NetcamW SNC-L200W Safety Precautions Important Safety InstructionsFeatures Before Using This Manual Contents Power InstallationStorage&Maintenance Power LED Title of Each ComponentList of Components Network LEDReset FlashPrivacy Distance and RangeConnection Internet ConnectionPower Connection Opening the Back Cover/Arranging CableInstalling the Camera LAN cable in direction aSee Hang the NetcamW onSetting the Router or Wireless Router Installing the IP Router of Wireless RouterSetting the Port Forwarding Installing the SNC Installer Click the Install ButtonSettings are not authorized during the installation process Close Button Closes the SNC Installer windowSearching the Connected NetcamW InternetSetting the Network Auto Setting the NetworkManually Setting the Network Click the ‘Yes ’ButtonUPnP by using the SNC Installer program Wireless Enable /Wireless Disable SNC-L200W Only ChooseYou can choose between Auto Local Setand Manual Set Manual Set ScreenPort Forwarding Search the set values again by Access to the NetcamW Website Access from a Local Network PCAccess from External Internet Installing the ActiveX Control For Windows 2000/Windows XPFor Windows XP Service Pack Manually Installing the Activex ControlUsing the Smart Viewer 12 13Record Button Record Video Record Stop Button Stop recordingPreset Passive Infrared PIR Select the Preset Number Click the Preset Operation ButtonCaptured images Using the Smart Viewer Using the Simple Player Record Moving ImagesPlay Back Recorded Files Change the Record RouteStop Recorded Files Print Playback ImagesCapture Playback Images Setting the Smart Viewer Click the Smart Setting Tab in the Smart Viewer ScreenPrint Button Print images Sub MenuSystem Configuration User Registration Network Configuration Ddns Configuration Set the DdnsAddress. typically Set the Adsl networkPort number used to access the NetcamW over the Internet Check the current connection status of the networkAddress PPPoE Status DisplayNetwork Status Notification Save Configuration Store Factory Default RestoreSystem Update Update Used to restore settings to factory defaultNormal Update Utilities Access to NetcamW via a cell phone USA Only 160x120 320x240 HelpInstalling the MultiViewer Program Multi UseRegistering the NetcamW Registering the NetcamWClick the MultiViewer Set Button Click the Delete Button Click the Yes ButtonConnecting the NetcamW Click the Yes Button when the message screen appearsUsing the MultiViewer MultiViewer ScreenView Multi Channel Sequence View Recording Video Repeat the and 2 to record another videoPress the Record Button Recording Motion Click the Motion area in the 16-split screenEnter the Sensitivity Value Click the Pretest ButtonRunning the SNC Installer Capturing VideoScreen Display Printing VideoYou can move to the image you want in Stop/Pause Mode Playing Back the MultiViewerReverse Playback Button Reverse-play back video Record File Playback Event Log InformationSetting the MultiViewer Setting the Viewer EnvironmentClick the Viewer Setup Tab Click the Close Button when the settings are completedSetting the Scheduled Recording Weight ServerCamera

SNC-L200(W) specifications

The Samsung SNC-L200(W) is an advanced surveillance camera designed to deliver high-quality video surveillance solutions for a variety of applications. This camera is part of Samsung's SNC series, which is known for its reliability, versatility, and cutting-edge technology.

One of the standout features of the SNC-L200(W) is its powerful 2-megapixel resolution, which provides clear and detailed images even in challenging lighting conditions. This high-resolution capability ensures that users can capture critical details in the footage, making it ideal for security surveillance in businesses, public venues, and residential areas.

The camera is equipped with advanced low-light performance technology, enabling it to produce clear images even in dark environments. This is achieved through the integration of infrared (IR) illumination, allowing the SNC-L200(W) to function effectively during night time or in poorly lit areas. The IR capabilities extend the operational range of the camera, ensuring comprehensive coverage regardless of the time of day.

Another notable technology incorporated into the SNC-L200(W) is the Wide Dynamic Range (WDR) feature. WDR enhances image quality in scenes with both bright and dark areas, providing balanced illumination and ensuring that no important details are lost due to glare or shadows. This feature is particularly useful in environments such as entryways and parking lots where lighting conditions can vary dramatically.

The SNC-L200(W) is designed with a robust and weather-resistant housing, making it suitable for both indoor and outdoor installations. It adheres to the IP66 standard for dust and water resistance, ensuring that the camera remains operational in various environmental conditions.

User-friendly features such as remote access and mobile compatibility elevate the SNC-L200(W)’s functionality. Users can monitor live feeds and access recorded footage from smartphones or computers, providing flexibility and convenience in security management.

Additionally, the camera supports various video compression formats, including H.265 and H.264, which optimize storage and bandwidth usage without compromising image quality. This feature is essential for enterprises looking to implement cost-effective security solutions while maintaining high standards of surveillance.

In summary, the Samsung SNC-L200(W) is a versatile and high-performance surveillance camera equipped with essential features such as high resolution, low-light capabilities, WDR technology, and mobile access, making it an ideal choice for any security application. Its durability and advanced technology provide reliable performance, ensuring peace of mind for users.