Samsung U-CA 401 user manual Connecting to a Power Source, Charging the battery

Connecting to a Power Source

There are two ways in which to provide the camera with power. You can use batteries or alternatively, you can use an AC(100 ~ 250V) Adapter (DC 5V 2.0A).

We recommend using batteries for a digital camera. (Within a year from the date of manufacture) The batteries are listed below.

Non rechargeable batteries	: CP-1 battery
Rechargeable batteries	: Digimax power pack(SLB-1037)

The product package may very depending upon which country in which you are located.

Charging the rechargeable battery [Digimax power pack (SLB-1037)]

Charging the battery

- Insert the rechargeable battery into the battery slot of the camera(p.16)

- Use the AC adapter included to connect the power supply of the camera to a wall power socket.

Following function lamp indicates charging status of the rechargeable battery.

Function lamp display	One LED blinks	Two LEDs blink	Three LEDs turn on
(Blue LED)
Charging	0% charged.	About 50% charged.	About 100% charged.

INFORMATION

If the function lamp display does not work even after inserting the rechargeable battery and connecting the power supply, please double-check the rechargeable battery polarity. (p. 16)

Please do not connect the AC adapter after inserting a non-rechargeable battery. When charging the rechargeable battery using the camera, the working temperature is 5~ 40. Please note that when the temperature is outside of the optimal charging range, the charging process may become slow or stop.

When charging the rechargeable battery using the camera, the following sequential blinks of the operational function lamp (BLUE) mean unsuccessful charging process.

Please check whether the battery is correctly inserted and the temperature is within the optimal charging range. If the problem still persists, please visit a nearby service center.

14