Samsung U-CA 401 user manual Before contacting a service center

Page 69

Before contacting a service center

Please check the following

Symptom

Causes

Remedy

 

 

 

The camera

- There is low battery capacity

- Insert fresh batteries

doesn’t switch on

- An AC Power Adapter is not connected

- Connect an AC Power Adapter

 

 

 

The camera

- The batteries are exhausted

- Insert fresh batteries

power ceases

- The Camera is turned off automatically.

- Push the power button to reactivate camera

whilst in use

- The Adapter plug is not connected securely

- Remove and re-insert the plug

 

 

 

Batteries drain

- The Camera is being used in low

- Keep the camera in warm conditions (i.e.

temperatures

inside a coat or jacket) and only remove it

quickly

 

in order to take images

 

 

 

 

 

 

- There is insufficient memory capacity

- After turning the camera off, insert a new

Camera does

 

memory card or delete unnecessary image files.

- The memory card has not been formatted

- Format the memory card.

not take

- The memory card is exhausted

- Insert a new memory card

images when

- The camera’s power is off

- Turn the camera power on

pressing the

- The batteries are exhausted

- Insert fresh batteries

Shutter button

- The memory card is locked

- Slide the write protect switch to the

 

 

 

bottom of the memory card

 

 

 

 

- A picture was taken within 0.6m from the

- If the subject is closer than 0.6m, select

The images

subject without setting an appropriate

macro shot mode or increase the

macro mode

camera to subject distance

are unclear

- Taking a picture beyond the flash range

- Take a picture within the flash range

 

 

- The lens is smudged or dirty

- Clean the lens

 

 

 

The flash does

- FLASH OFF mode has been selected.

- Disengage FLASH OFF mode

not fire

 

 

 

 

 

Incorrect date

- The date and time have been set

- Reset the date and time correctly.

and time is

incorrectly.

(p.59 ~ 60 )

displayed

 

 

 

 

 

69

Image 69
Contents English Instructions Contents Starting PC Mode Removing the USB Driver for LCD monitor indicator Function lampLCD monitor ResizeAbout the icons Getting to know your cameraPage An FCC warning Refer to This digital camera can be used forViewing images on a TV. refer to Editing images on a PC Refer toThis digital camera can be used for Manufacturers contents Identification of features Front & TopBack Bottom / 5-function button Mode switchType Function Lamp LampConnecting to a Power Source Charging the batteryOne LED blinks Two LEDs blink Connecting to a Power Source Removing the battery Insert the batteries Polarity+andAccording to the polarity Write SwitchBLabel part C ProtectPrecautions on Using the Memory Stick Duo Removing the memory card Inserting the memory cardLCD monitor indicator File type AviMJPEG Starting the recording modePress the shutter button to capture an image Starting the recording modeThings to Watch Out for When Taking Pictures Using the camera buttons to adjust the camera Zoom W button/ Zoom T button Required setting. Once the maximum digital zoom 4X isTele Zoom Digital zoom Tele Numerical mark next to the zoom barVoice memo / UP button Macro / Down button FocusingIndicator displays on the LCD monitor Fixed focusFlash / Left button Left button 2SEC self-timer Self-timer / Right buttonDouble self-timer SecondsMENU/ OK button Play mode / LCD buttonMySET 2272X1704 2048X1536 1600X1200640X480 320X240 Menu tab Main menu Sub menu Camera working mode Mode How to use the menuMode Fixed as 2272X1704 in the Text modeSize 2272 2048 1600 1024 640 320Quality Metering White balance Shooting EffectSub menu Icon SharpnessEdges of the image are softened. This effect is suitable For editing images on your PC Edges of the image are sharpManual Exposure Night Mode Fixed as +0.0EV in the Text modeExposure Starting play mode Displayed on the LCD monitor Will beWill be displayed on Press the shutter button to play back a recorded voice100 ISO sensitivity 2272X1704 Size F3.2 Aperture value 60 S Shutter speedFlash is used 2004/05/01 Recording dateButton Voice memo / Up button Save it separatelyEnlargement button Voice memos can’t be recorded onto movie clip files Delete /DOWN buttonLCD button Left / RIGHT/ MENU/ OK buttonSetting up the play back function using the LCD monitor OFF ~ 10SEC00 ~ 99PRINTS Protecting images Deleting all imagesStarting the slide show Protecting imagesResize Starting the slide showCopy to Card Select the Standard menu by pressing the UP Down button and press the Right buttonRecordings Select the Index menu by pressing the UP/ Down Button If no is selected Cancel the index print settingButton and press the Right button If Index is selected~10MIN Setup menuMenu tab Main menu File nameAuto power off Language Setting LanguageFormatting a memory card Select the Language menu by pressing the UPImprinting the recording date Setting up the Date/ Time/ Date typeImprinting the recording date SoundLCD brightness Function lamp InitializationRESET ALLSelecting Video out type Quick view Quick view function can’t be activated~ 3 SEC Start up image Setting up the Mycam menuShutter sound Start up soundImportant notes Important notes Memory card error Photography modeInternal memory error IndicatorBefore contacting a service center Exposure is excessive Reset exposure compensation Bright Symptom Causes Remedy Camera Camera malfunctionClean the lens or LCD Camera onSpecification DC power input connector Digital output connector USB Interface Audio MonoRechargeable battery Self Charging System Power Source SLB-10371,000mAh AC Adapter SAC-515.0V,2.0ASystem Requirements Software NotesAbout the software Setting up the application software Install Digimax Viewer. Click Next button Click the OK button Then click Next buttonFrame 15 may not appear according to the system requirements Select Components window will appear. Click Next buttonSetting up the application software Information Starting PC Mode Cut Starting PC Mode Removing the USB Driver for Windows 98SE Removable Disk Removing the removable disk Using the USB Driver for MAC Setting up the USB Driver for MACProperty Digimax ViewerScreen shots of what is being viewed on the current monitor Using PhotoImpressionTemplate, or Connect with Other Software Outputs the edited picture according to your preferencesUse a USB cable with the correct specification FAQWin 98/ME Trace Start Settings Manager Install the camera driver correctlyUSB interface Case When using the USB hub SystemSettings Control FAQ Memo Memo 6806-1904