Fixed focus
To focus on the subject positioned outside of the center, use the focus lock function. 
Using the Focus Lock
1.Ensure the subject in the center of the autofocus frame.
2.Press the SHUTTER button halfway. When the autofocus lamp (green) lights up, it means the camera is focused on the subject. Be careful not to press the SHUTTER button all the way down to avoid taking an unwanted pictured.
3.With the SHUTTER button still pressed down only halfway, move the camera to recompose your picture as desired, and then press the SHUTTER button completely to take the picture. If you release your finger from the SHUTTER button, the focus lock function will be canceled.
[ The image to be captured ] | [ Press the SHUTTER button | [ Recompose the picture and fully |
| halfway and focus on the subject ] | depress the SHUTTER button ] |
FLASH( 
) / LEFT button
When the menu is displayed on the LCD monitor, pressing |
|
|
|
|
| |
the LEFT( ) button makes the cursor shift to the left tab. |
|
|
|
|
| |
When the menu is not displayed on the LCD monitor, the |
|
|
|
|
| |
LEFT( ) button operates as the FLASH ( | ) button. |
|
|
|
|
|
Selecting the flash mode |
|
|
|
|
|
|
1. Slide the mode switch to the STILL IMAGE mode. |
|
|
|
|
| |
|
|
|
|
| ||
|
|
|
|
| ||
2. Press the Flash( ) button until the desired flash mode |
|
|
|
|
| |
indicator displays on the LCD monitor. |
|
|
| [ Selecting the Auto flash ] | ||
3.A flash mode indicator will be displayed on the LCD monitor.
Use the correct flash to suit the environment.
Flash range(AUTO) : 0.2 ~ 2m
27