Samsung U-CA 401 user manual Protecting images, Starting the slide show

Protecting images

4. Select the desired secondary menu by pressing the
UP/DOWN button and press the OK button.
[UNLOCK]	: Cancels the protect function.
[LOCK]	: Sets up the protect function.
- If you select the[ONE PIC] sub menu at step 3, you can		UNLOCK:
protect or unprotect another image by pressing the
		EXIT:SH1
LEFT/ RIGHT button. If you press the SHUTTER button,		MOVE PIC:	SET:OK
the Image Protection menu will disappear.

-If you protect an image, the protect icon( ) will be displayed on the LCD monitor. (An unprotected image has no indicator)

-An image in LOCK mode will be protected from [DELETE] or [DEL.ALL] functions, but will NOT be protected from the [FORMAT] function.

5.Press the shutter button and the menu will disappear.

Starting the slide show

Images can be displayed continuously at pre-set intervals. You can view the slide show by connecting the camera to an external monitor.

1. Press and hold the Play mode button for 2 seconds, and
press the Menu button.
2. Press the LEFT/ RIGHT button and select the [SLIDE]			SLIDE
menu tab.
3. Use the UP and DOWN buttons to select the desired
		OFF
submenu value, and then press the RIGHT button.
- Slide Show Display Interval: OFF, 1 ~10 seconds	EXIT:MENU			MOVE:

4.Use the UP and DOWN buttons to set whether to repeat the slide show.

[ON] : Even once a cycle(from the first image to the last
image) is completed, the slide show will continue to
repeat itself.			SLIDE
[OFF]: If a cycle is completed, the slide show will stop				REPEAT
automatically.		1 SEC		ON
				OFF
5. Press the OK button and the slide show will start.
	MOVE:		CHANGE:
- To pause the slide show, press the shutter button.
- To start the slide show again, press the shutter button again.
- Press the menu button again and the slide show will stop.

50