Nikon SB-16 instruction manual Lock the flash unit Coupler, Remove the Battery Holder MS·5 @

-BASIC OPERATION-confinued----------

3 lock the flash unit

. coupler.

Turn the open/closed knob to the "closed " position (indicated by a dot) to lock the flash unit coupler ; make sure the flash unit and flash unit coupler fit tightly together.

Note: To remove the flash unit coupler. set the knob to the OPEN position. and while applying pressure to the knob. gently pull the coupler off.

4 Remove the Battery

. Holder MS·5 @ .

Open the battery chamber lid @ by sliding it in the direction of the arrow and remove the battery holder.

Note: You may feel slight tension when re - moving or replacing the holder. This tension. however. can be ignored.

8