Nikon SB-16 instruction manual Basic Operation

BASIC OPERATION ------------

1 Set the openlclosed knob 2 Attach the flash unit

•® on the flash unit coupler . coupler to the flash unit.

to the OPEN position.	Position the flash unit and flash unit
	coupler, so that the secondary flash
	head ® on the flash unit and the sen-
	sor (J) on the flash unit coupler face
	the same direction . Insert the posi-
	tioning claw ® into the slot ® on the
	flash unit.

Then , while applying pressure to the open/closed knob, push the flash unit coupler into the flash unit until it clicks into place .

Note: If batteries have already been installed in the battery chamber. make sure the ON/OFF switch ® is at the "o ff " position to avoid acci- dental firing.

7