TTL Sensor Cord SC-12
One meter long, this cord allows the SB-14 to be used with the Nikon F3 or F3 High-Eyepoint camera for auto- matic through -the -lens control of the flash exposure. When attached, the camera's shutter speed is auto- matically switched to the proper flash synchronization speed of 1/80 sec. with the shutter speed dial at A or 1/125 sec. and above. The ready-light inside the camera's viewfinder also operates in the normal manner.
Sensor Remote Cord SC-13
Also one meter long, the SC-13 allows mounting of the SB-14's Sensor Unit SU-2 directly on the Nikon FE, FM2, FM, FG, or EM's hot shoe for automatic, off-camera operation with the flash unit pointed in any direction . With the Nikon F3 or F3 High-Eyepoint camera, the Flash Unit Coupler AS-4 is required and control of the flash exposure is automatic, but not through-the-lens.
Sync Cord SC-lS
A coiled cord over one meter in length, the SC-15 screws into the camera's sync terminal and allows the SB-14 to be detached from its bracket and used off-camera.