Nikon 14 Set the lens aperture ring to an approprIate Number, Set the shooting mode selector Q

Page 8

- BASIC OPERATION-continued ---------

;

9. Set the lens' aperture ring to an approprIate

f/ number.

In the example, £/4 is selected.

10. Set the shooting mode selector Q).

Turn the ring on the front of the sen- sor unit until the white index is op- posite the color corresponding to that of the £/stop selected . (Orange is selected in this example). This sets the flash unit for automatic operation.

11. Turn on the power supply.

Image 8

Contents Nikon Speedlight Nomenclature Page Contents Foreword Plug in the sensor CD Attach the bracket @ toAttach the bracket to Flash unit Check the position Connect the power supplyAttach the sync cord Set the cameras shutter speed for proper syn- chronization Set the exposure calcu- -lator dial @Set the lens aperture ring to an approprIate Number Set the shooting mode selector QTurn on the power supply Watch the ready-light Take the picture Turn off the power supplyWhen the shutter is tripped, the flash Controls in Detail Synchronization chart Shutter Speed DialFlash-to-subject distance Exposure calculator Dial @For Automatic Operation Recycling time and depth of field Controls in Detail Sensor Unit SU-2 At the Three Auto PositionsAt the S Slave Position At the M Manual PositionControls in Detail Open-Flash Button Flash Head Sync/Multiple Flash Sockets Wide-Flash Adapter SW-5 CD Subjects Reflectivity Fill-In Flash PhotographyAccessories Sync Cord SC-lS TTL Sensor Cord SC-12Sensor Remote Cord SC-13 ~EDEYEn Optimum Battery Performance Guide number Dimensions Asaiiso 100 and meters 32 22 with Wide-Flash WeightAccessories provided Power sourcePage 1IIIto