Nikon 14 manual Attach the sync cord, Check the position, Connect the power supply

Page 6

- BASIC OPERATION -continued ----------

4. Attach the sync cord 0 .

Screw one end of the Sync Cord SC- 11 into either of the flash unit's sync! multiple flash sockets ® and screw the other end into the camera's sync terminal.

Note : Some cameras do not have the threaded sync terminal.

5. Check the position of the

flash head.

Make sure that the flash head is in the normal shooting position.

6. Connect the power supply.

Plug the cord from the power supply into the flash unit's external power terminal@.

Note: The SB·14 is powered by only an external power supply.

6

Image 6

Contents Nikon Speedlight Nomenclature Page Contents Foreword Attach the bracket @ to Attach the bracket to Flash unitPlug in the sensor CD Connect the power supply Attach the sync cordCheck the position Set the cameras shutter speed for proper syn- chronization Set the exposure calcu- -lator dial @Set the shooting mode selector Q Turn on the power supplySet the lens aperture ring to an approprIate Number Turn off the power supply When the shutter is tripped, the flashWatch the ready-light Take the picture Controls in Detail Synchronization chart Shutter Speed DialExposure calculator Dial @ For Automatic OperationFlash-to-subject distance Recycling time and depth of field Controls in Detail At the S Slave Position Sensor Unit SU-2At the Three Auto Positions At the M Manual PositionControls in Detail Open-Flash Button Flash Head Sync/Multiple Flash Sockets Wide-Flash Adapter SW-5 CD Subjects Reflectivity Fill-In Flash PhotographyAccessories TTL Sensor Cord SC-12 Sensor Remote Cord SC-13Sync Cord SC-lS ~EDEYEn Optimum Battery Performance Accessories provided Guide number DimensionsAsaiiso 100 and meters 32 22 with Wide-Flash Weight Power sourcePage 1IIIto