Metz 28 CS-2 instruction manual Technical data

Page 26

13. Technical data

Guide number at ISO 100 / 21°:

28 (with telephoto attachment , 7 mm height)

22 (without attachment)

16 (with wide-angle diffuser , 2.5 mm height)

Flash modes:

EASY, Automatic A, Manual M, Metz-Remote SL

Slave modes:

Without preflash suppression

With preflash suppression

Adapted slave mode

Automatic apertures:

￿f1.4 / f2 / f2.8 / f4 / f5.6 / f8 / f11 / f16 Manual light output settings:

P 1/1, P 1/2, P 1/4, P 1/8, P 1/16

Light sensitivity:

ISO 50 ... ISO 3200

Colour temperature: approx. 5600 K

Flash duration: 1/300s ... 1/45000s

Recycling times with full-power flash:

With alkaline manganese batteries approx. 8s With NiCad batteries approx. 6s

With NiMH batteries approx. 6s

Number of flashes with full light output: With alkali-manganese batteries > 100 With NiCad batteries (250 mAh) > 35 With NiMH batteries (700 mAh) > 100

Light coverage: rectangular

Focal length in keeping with 35 mm format As of 24 mm with wide-angle diffuser (horizontal 75°, vertical ca. 55°).

As of 35 mm without attachment

(horizontal approx. 56°, vertical approx. 40°). As of 85 mm with telephoto attachment (horizontal apporx. 25°, vertical approx. 18°).

Weight: approx. 140g (without batteries)

Dimenions (w x h x d): 75.5 mm x 83 mm x 32.5 mm

Included:

Flash with telescopic bracket, attachments, Operating Instructions

110

Image 26
Contents Mecablitz 28 CS-2 digital Contents Foreword11.2 Meter-Feet changeover m ft 106 11.3 Safety instructions Loading and replacing the batteries Power supplyPreparations Flash coverage and reflector attachments Switching the flash unit on and offAutomatic switch-off function / AUTO-OFF Mounting / Removing the flash unitSlave mode Switch on and shoot in Easy modeTo terminate briefly depress the Mode key Adapting the slave flash unitSlave modes SL Slave mode without preflash suppression SL Settings on the slave flash unitAdapting the flash unit Slave mode with Preflash suppression SLAdapted slave mode SL Settings for camera and flash unit Briefly depress the Mode key to terminateFlash unit setting Cameras where operating mode, ISO and aperture can be setCamera setting Cameras where operating mode, ISO and aperture cannot be set Flash modes Auto flash mode aSetting procedure Avoid exposing the sensor to direct sunlightManual flash mode M Metz-Remote Flash Mode SLEasy Mode ISO speed Flash parametersAutomatic f-stop Reflector statusFlash exposure correction value EV Flash readiness indication DisplaysManual partial light output Correct exposure confirmationMaximum flash range indication Meter-Feet changeover m ft Automatic switch-off functionSpecial functions Following settings are made Re-establishing the flash unit settings Setting procedure to adapt flash delay Forming the flash capacitor Troubleshooting, remedies and after-sales serviceProblem QuestionUnsuccessful troubleshooting Technical data Page Bouton d’essai et témoin de recyclage Manual firing button and flash-ready indicatorTasten für Wertverstellung Regleta giratoria para la cámara Vite camera e stativo Tornillo para cámara y trípode171 172 173 Metz-Werke GmbH & Co KG Postfach 1267 D-90506 Zirndorf