-The slave mode set on the slave flash unit is not suitable for your camera. Select a different slave mode!
• Yes:
-Check the flash parameters set on the slave flash unit!
Adapt the unit’s flash parameters to the camera settings!
Set a positive correction value.
Problem:
All shots are overexposed.
Check the flash parameters set on the slave flash unit!
Adapt the unit’s flash parameters to the camera settings!
Set a negative correction value.
Unsuccessful troubleshooting
Turn off the flash unit by the main switch, wait for a brief moment and then switch the unit on again.
If, in spite of all hints, the flash unit still does not work, then please consult your local authorized dealer.
109