Shooting(_
Exposure compensation
This camera automatically adjusts the exposure according to the ambient lighting conditions. You can also select the exposure value by using the [EV] menu.
[] Compensating Exposure
1.Click the Up/Down button from the Shooting menu to select [EV] ( [] ).
2.Use the Left and Right buttons to set the desired exposure compensation factor.
3.Press the OK button. The value you
set will be saved and the Exposure Compensation setup mode will be closed. If you change the exposure value, the exposure indicator ( [] ) will be displayed on the Left of the LCD screen.
A negative exposure compensation value reduces the exposure. Note that a positive exposure compensation value increases the exposure and the LCD screen will appear white or you may not get good pictures.
ISO
You can select the tSO sensitivity when taking pictures.The speed or specific
[Auto] : The camera's sensitivity is automatically changed by variables such as lighting value or subject brightness.
[ISO 80, 100, 200,400, 800, 1600, 3200] : You can increase the shutter speed while
the same amount of light is present, by increasing the ISO sensitivity. However, the image may be saturated in high luminance. The higher the ISO value, the higher the camera'ssensitivity to light and therefore the greater its capacity to take pictures in dark conditions. However, the noise level in the image will increase as the ISO value increases, making the image appear coarse.
÷When [Motion Capture] is set, tSO speed will be set to Auto.
÷[ISO] is enabled only in [Program] mode.
41