Connecting to a Power Source
Important information about USB cable usage.
• Use a USB cable with the correct specification.
• Do not connect the camera to a PC through a USB hub. Connect the camera directly to the PC.
• Do not connect the camera and other devices to a PC at the same time. Connect the camera by itself.
• If your PC can not detect the camera when you use the front side USB port, use the back side USB port of computer.
• If the USB port of the PC doesn't meet the Power output standard (5V, 500mA), the battery may not charge.
[] How to charge the rechargeabte battery
o Before inserting any cables or theAC adapter, make sure the direction of the cable or adapter plug is correct. Do not insert
by force. It may cause breakage of cable or camera.
•If the charging LED of the AC Charger does not turn on or blink after you have inserted the rechargeable battery, please make sure the battery is inserted correctly.
•If you charge the battery with the camera power on, the battery won't be fully charged. Turn the camera off while charging the battery to get a full charge.
[] Charging LED of the AC charger
Red LED is on
Green LED is on
Orange colored LED is off or blinking
•If you insert a fully discharged battery to charge it, do not turn on the camera at the same time. If you do, the camera may turn off unexpectedly. Charge the battery for more than 10 minutes before using the camera.
•Do not use the flash frequently or take a movie clip with the fully discharged battery that has been charged for only a short time. Even if the charger is inserted, the camera power may be turned off because the rechargeable battery is discharged again.
13