Samsung AQ 1O0 manual Before contactinq a service center

Before contactinq a service center

The flash does not fire.

oFlash off mode has been selected.

-e. Disengage flash off mode.

oThe camera mode can'tuse the flash.

-+ Refer to the FLASH instructions (p.35).

Incorrect date and time is disulaved_

•The date and time have been set incorrectly or the camera has adopted the default settings.

-+Reset the date and time.

The camera buttons do not operate. oThe camera has malfunctioned.

-+ Remove/re-insert battery and switch the camera on.

A card error has occurred while the memor_v card is in the camera. oThe memory card format is incorrect.

-+ Re-format the memory card. (p.58)

The imaues don't ulav back.

olncorrect file name (Violation of DCF format). -+ Do not change the image file name.

Color of imageeis different to the orioinal scene. oWhite balance or effect setting is incorrect.

-+ Select the appropriate White balance and effect.

Imaaes are too bricLht.

•Exposure is excessive.

-e Reset exposure compensation.

No imaae on external screen.

•The external screen has not been connected properly to the camera.

-e Check the connection cables.

oThere are incorrect files on the memory card. -+ Insert a memory card that has correct files.

The !Removable Disk! file does not aeDear in mv comuuter'sfile s_stem. oThe cable connection is incorrect.

-e Check the connection. oThe camera is off.

-+ Turn the camera on.

•The operating system is not Windows XP, Vista, 7 / Mac OS 10.4. Alternatively the PC does not support USB.

-+ Install Windows XP, Vista, 7 on a PC or Mac OS 10.4 or later on a computer that supports USB.

A part of the LCD screen does not occasionally turn on or a spot appears. oAIthough the LCD screen is manufactured with high precision

technology, the precision pixels occasionally do not light or red, white, and blue spots appear.

This phenomenon does not affect the quality of the recorded image and it is not a malfunction.

A vertical line appears on the LCD screen when taking a picture of a

olf a subject is reflecting a very bright light, a gray, black, red, or purple vertical line may appear.

This is a phenomenon called smear and it does not affect the quality of the recorded image. This is not a malfunction.

91