Samsung Digimax 202 manual Connecting to a Power Source

Identification of features

Camera status lamp

Color	Status	Camera Status
	Blinking and off	Power on processing
	On	When the LCD monitor is turned off
		When the USB cable is connected
Green
	Blinking slowly	Flash recharging
	Blinking fast	Image processing(compression/decompression)
		USB busy

Self-timer lamp (Based on 10-second Self-timer; see p.29)

Color	Status		Camera Status
	Blinking	- For the first seven seconds, the LED blinks at 1second intervals.
Red		- For the final three seconds, the LED blinks quickly at 0.5-second intervals.
	Blinking once time	When the camera’s power is on / when the shutter button is released.
Beep
	Beep sound		Camera condition
	Power beep		When the camera power is turned on/off.
Normal beep (a short beep)			Rotating the mode dial/
			pressing the camera buttons
Error beep (long beep twice and			When an error occurs
	short beep twice)
	Self-timer beep		Beeps simultaneously with the Self-timer lamp blinking.

- To hear the beep sound, you have to set the beep sound to on in the setup mode menu.

Connecting to a Power Source

There are two ways in which to provide the camera with power. You can use batteries or alternatively, you can use an AC(100 ~ 250V) Adapter (DC 3.3V 2.0A).

We recommend using batteries for a digital camera.(Within a year from the date of

manufacture) The batteries are listed below.
Non rechargeable batteries	: AA type	– Alkaline, Ni-Mn, Ni-Zn, Lithium
	CR-V3 type	– Lithium
Rechargeable batteries	: AA type	– Ni-MH, Ni-Cd (over 1000mA)
	CR-V3 type	– Digimax Battery I-Pack(SBP-1103)
	Battery pack	– Digimax Battery Pack(SBP-3603)

14