Imprinting date recording
There is an option to include DATE/TIME on still images. |
|
|
|
|
|
| |
Date Imprinting |
|
|
|
|
|
|
|
1. Press the MENU button. |
|
|
|
|
|
| |
|
|
|
|
|
| ||
2. Press the LEFT/ RIGHT button and select the [SETUP] |
|
|
|
|
|
| |
|
|
|
|
|
| ||
menu tab. |
|
|
| SETUP | |||
3. Select the [IMPRINT] menu by pressing the UP/ DOWN |
|
| |||||
| DATE |
| OFF |
| |||
button and press the RIGHT button. |
|
|
| ||||
| TIME |
| DATE | ||||
4. Use the UP and DOWN buttons to select the desired |
| IMPRINT |
| DATE&TIME | |||
date imprint type, and then press the OK button. |
| BACK: |
|
|
| SET:OK | |
- [OFF] | : The DATE & TIME will not be |
|
|
|
|
|
|
| imprinted on the image file. |
|
|
|
|
|
|
- [DATE] | : Only the DATE will be imprinted on the image file. |
|
|
|
| ||
- [DATE&TIME] | : The DATE & TIME will be imprinted on the image file. | ||||||
5. Press the menu button twice and the menu will disappear.
INFORMATION
The Date & Time are imprinted at the bottom right side of the still image.
The date will be imprinted as a DATE TYPE setting.
TIME is imprinted in the following way : [Hour : Minute : Second] and hours are shown using the 24 hour clock.
The imprint function is applied only to still images.
Beep
If you set the operation sound to ON, various sounds will be activated for camera startup, when buttons are pressed, and if there is a card error, so that you can be aware of the camera operation status.
Setting Operation Sounds
1.Press the MENU button.
2.Press the LEFT/ RIGHT button and select the [SETUP] menu tab.
3.Select the [BEEP] menu by pressing the UP/ DOWN button and press the RIGHT button.
4.Select a desired sub menu by pressing the UP/ DOWN button and press the OK button.
- If [ON] is selected | : The buzzer will sound. |
- If [OFF] is selected | : The buzzer will not sound. |
SETUP
TIME
IMPRINT ON
BEEP OFF
BACK: 
SET:OK
60