Samsung Digimax 202 Bus controller, USB interface Case When using the USB hub, Settings Control

Page 99

FAQ

 

Win XP

: Trace [Start

Control Panel Performance and

 

 

Maintenance

System

Hardware Device Manager

 

 

Universal Serial Bus controller].

 

 

There must be USB Host Controller and USB root hub under [Universal serial

 

bus controller].

 

 

 

 

In addition, double-click on the USB Universal Host Controller and the USB

 

Root Hub to check if the Device Status states "This device is working properly".

 

If the Device Status says the device is "not working properly", click the "Driver"

 

tab and then click [Update Driver] or [Reinstall Driver].

 

 

When all the conditions mentioned above are met, the computer can support

 

the USB interface.

 

 

 

[Case 7]

When using the USB hub.

 

 

 

 

There may be a problem in connecting the camera to the PC through the USB

 

hub if the PC and the hub are not compatible. Wherever possible, connect the

 

camera to the PC directly.

 

 

 

[Case 8]

Are other USB cables connected to the PC?

 

 

 

The camera may malfunction when it is connected to the PC at the same time

 

as another USB cable. In this case, disconnect the other USB cable, and

 

connect only one USB cable to the camera.

 

 

[Case 9]

When I open the Device Manager (by clicking Start

(Settings) Control

 

Panel

(Performance and Maintenance)

System

(Hardware) Device

 

Manager), there are Unknown Devices or

Other Devices entries with a

 

yellow question mark(?) beside them or devices with an exclamation mark(!)

 

beside them.

 

 

 

 

Right-click on the entry with the question(?) or exclamation (!) mark and select

 

"Remove". Restart the PC and connect the camera the again. For Windows 98

 

PC, remove the camera driver also, restart the PC, and then reinstall the

 

camera driver.

 

 

 

 

Double-click on the entry with the question(?) or exclamation(!) mark, click the

 

"Driver" tab, and click [Update Driver] or [Reinstall Driver]. If a message appears

asking you to specify the location where the appropriate driver for the device is, specify the "C:/Windows/inf" or "C:/Windows/inf/other" folder (where C: is the drive letter of the hard disk where the operating system is installed).

99

Image 99
Contents English Instructions Contents Specifications LCD monitor Starting the slide show Removable Disk Removing the removable disk Setup menuDelete button About the icons Getting to know your cameraPage An FCC warning Refer to This digital camera can be used forThis digital camera can be used for Manufacturers contents Identification of features Front & TopBack & Bottom Side/ 5-function button Mode dialPhoto Frame mode Movie clip modeImage size Connecting to a Power Source Information Connecting to a Power SourceInsert the batteries taking note of the polarity + ArrowInstructions on how to use the memory card 640 Recorded image size Super fine Fine Normal1600 1024Removing the memory card Inserting the memory cardLCD monitor indicator Close the memory card cover Starting the recording modeSelect the Still Image mode by rotating the mode dial Image quality 35~36Starting the recording mode Starting the recording mode Information Used for taking an image in the Recording mode Wide / Tele buttonUsed for digital zooming in / out Tele Zoom Digital zoom Tele Wide / Tele buttonFlash / Left button Up/Down buttonFlash / Left button Self-timer / Right button2SEC self-timer Self-timer / Right buttonCompensating Exposure +/- buttonFocus lever Pressing the LCD button MENU/ OK buttonLCD button Pressing LCD buttonUsing the LCD monitor to adjust the camera settings Use the UP and Down buttons to select a sub menu How to use the menuQuality SizeMetering QualitySharpness MeteringWhite balance Photo frame will open EffectPhoto Frame No effect is added to the image174021 Recording time Size1024X768 Size 2004/01/01 Recording dateStarting play mode Thumbnail / Enlargement button Using the camera buttons to adjust the cameraMovie clip files cant be enlarged Button Highlighted imageUP/ Left / RIGHT/ MENU/ OK button Play & Pause / Down buttonDelete button LCD buttonMenus are subject to change without prior notice Setting up the play back function using the LCD monitorStarting the slide show Protecting images Deleting all images Press the LEFT/ Right button and select DEL.ALL menu tabButton and press the OK button UP, DOWN, LEFT, and Right buttons Copy to cardDpof Setting the Number of Copies to Print Rotating an image Resize Sub menu 1024X768 640X480Resize table Setup menu Items indicated by are default settings Menu tab~ 10MIN File name Down button and press the Right button Auto power offFile name Select the PWR OFF menu by pressing the UPFormatting a memory card LanguageFormatting a memory card Setting up the Date typeTime Setup Date SetupOFF Date & Time will not be Imprinted on the image file Imprinting date recordingBeep Date imprint type, and then press the OK buttonFrequency OFF Quick view function can’t be Activated ~ 3 SEC InitializationRESET ALLSelect the Reset menu by pressing the UP/ Down Quick viewLatest Setting up the Mycam menuSamsung brand logo Start up soundStart up image Be displayedImportant notes Important notes Indicator More unusual circumstances Museum, art center Flash Photography modeMemory card error Internal memory error Format the memory withBefore contacting a service center Camera malfunction Symptom Causes RemedyDo not operate Switch camera on Clean the lens or LCDSpecifications File Format Power Source CR-V3 type Lithium batteriesDimensions WxHxD Specifications are subject to change without prior noticeSystem Requirements Software NotesAbout the software Application program Setting up the application softwareClick Install Digimax Viewer. Click NextClick the Next button Like to installMGI III file will open Installation is complete. Click the Finish button Information Starting PC Mode Cut Starting PC Mode Removing the USB Driver for Windows 98SE Removable Disk Important information whilst using the Removable DiskRemoving the removable disk Using the USB Driver for MAC Setting up the USB Driver for MACProperty Digimax ViewerOrganize your photos and other media files into albums Save your results to show to othersMGI PhotoSuite III SE Get imagesDisplay help window Introduction to navigation barReturn to the previous step Return to Welcome screenGet Information Click Open Refer to page for more information about creating an AlbumNumber of special effects can be applied Layout options Arranged together on aCommon background Photo Layouts The Photo Layouts activityOrganize Displayed, then click New Now be createdMaster Album window will open. Click the OK button Add images to the album AlbumAdding images is complete Viewing images as a slide show Saving or sharing images Menu of Share stepsTo assign a new name or path to the file Mailing imagesWin 98/ME Trace Start Manager Install the camera driver correctlyCheck the USB port in your computer or keyboard 2000, ME .XPCamera to the PC directly Case USB interface Case When using the USB hubSettings Control Bus controller6806-1747