Sanyo LNS-T31A, LNS-W31A, LNS-T32 Lens Replacement Procedure for a Type, Fig-1, Fig-2 Fig-3, Fig-4

Page 2

LENS REPLACEMENT PROCEDURE (FOR "A" TYPE )

Perform the steps 1 to 6 for lens replacement.

First set the lens at the center position with lens shift adjustment.

1REMOVE THE LENS COVER AND LIGHT- BLOCK SHEET (See Figure-1 and 2)

1.Remove 2 screws-A.

2.Press the button (or remove 2 screws-B) on the lower of the lens cover and remove the lens cover.

3.Remove the light-block sheet from the light- block sheet base.

SCREW "A"

BUTTON

LIGHT-BLOCK

SHEET BASE

LENS COVER

Fig-1

LIGHT-BLOCK SHEET

SCREW "B" (Some models)

2REMOVE THE LIGHT-BLOCK SHEET BASE

(See Figure-3 and 4)

1. Slide the light-block sheet base upward.

2.Remove the light-block sheet base.

LENS MOTOR PARTS NO. (LOCATED ON THE LENS)

LIGHT-BLOCK

SHEET BASE

Fig-2

Fig-3

LIGHT-BLOCK SHEET BASE

Fig-4

-2-

Page 1 Page 3
Image 2
Page 1 Page 3
Contents Lens Replacement Procedure Parts ListFig-2 Fig-3 Lens Replacement Procedure for a TypeFig-1 Fig-4Fig-7 Fig-5Fig-6 Fig-8Fig-1-2 Lens Replacement Procedure for B TypeFig-1-1 Fig-1-3Lens Lock Latches Mount the Front Cabinet and Lens Remove the LIGHT-BLOCK Sheet Base and LIGHT-BLOCK Sheet Lens Replacement Procedure for C TypeRemove the Lens Cover and Front Cabinet Remove the LensCorrecting the focus Mount the LensMount the LIGHT-BLOCK Sheet and LIGHT-BLOCK Sheet Base Mount the Front Cabinet and Lens Cover
Top Page Image Contents