Sanyo LNS-W31A, LNS-T32, LNS-T31A manual Fig-6, Mount the Front Cabinet and Lens

Page 6

5

MOUNT THE LIGHT-BLOCK SHEET AND LIGHT-BLOCK SHEET BASE (See Figure-6)

1. Mount the light-block sheet on the lens as shown in the Figure-6. (In the same position as the removed sheet has been placed). Use the sheet included with the lens.

2.Make sure the part no. and mark (TOP and BACK) on Light-Block Sheet and set them properly.

3.Mount the light-block sheet base included with the lens.

LIGHT-BLOCK

SHEET BASE

LIGHT-BLOCK

SHEET

6

FRONT

CABINET

LENS COVER

MOUNT THE FRONT CABINET AND LENS

COVER (See Figure-6 and 7)

Fig-6

1. Mount the front cabinet with 2 screws.

2.Mount the lens cover.

For the cabinet Fig. 1-1, position the marked UP of Lens Cover on top and push in to the front cabinet and turn the Lens Cover fully clockwise until it is properly locked.

For the cabinet Fig. 1-3, push the Lens Cover onto the cabinet

Fig-7

-6-

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Lens Replacement Procedure Parts ListFig-2 Fig-3 Lens Replacement Procedure for a TypeFig-1 Fig-4Fig-7 Fig-5Fig-6 Fig-8Fig-1-2 Lens Replacement Procedure for B TypeFig-1-1 Fig-1-3Lens Lock Latches Mount the Front Cabinet and Lens Remove the LIGHT-BLOCK Sheet Base and LIGHT-BLOCK Sheet Lens Replacement Procedure for C TypeRemove the Lens Cover and Front Cabinet Remove the LensCorrecting the focus Mount the LensMount the LIGHT-BLOCK Sheet and LIGHT-BLOCK Sheet Base Mount the Front Cabinet and Lens Cover
Top Page Image Contents