GETTING STARTED
Attaching the ViviCam 3105s Strap
Attach the ViviCam 3105s strap as shown in the illustration.
1 | 2 |
Loading the Batteries (Optional Accessory)
You can use either 2 AAA size batteries (Alkaline or
1.Make sure the ViviCam 3105s is turned off.
2.Open the battery cover.
3. Load the batteries, noting correct polarity (+ and
4. Close the battery cover firmly.
The SDRAM needs power supply all the time to maintain its function. If the batteries are removed from the ViviCam 3105s, images stored in SDRAM may lose or the captured images may deteriorate or the ViviCam 3105s may not be operated normally or may shut down automatically. When one of the above issues occurred, remove the batteries from the ViviCam 3105s for approximate five to ten minutes, and then load the batteries again to turn on the power. In this case, the stored images have been deleted.