Pentax 21717 Attaching the Lens Hood, Screw-on Type DA 70mm f/2.4 Limited dedicated lens hood

Page 28

 

 

ATTACHING THE LENS HOOD

 

26

In order to avoid the deterioration in image quality from internal reflection, use of the lens hood is recommended.

a

a.Screw-on Type (DA 70mm f/2.4 Limited dedicated lens hood)

Screw the hood on to the front of the lens to attach it. The hood is telescopic. Extend it fully to use it.

"Memo:

The lens hood cannot be mounted on some circular polarizing filters that are not produced by PENTAX, depending on the type.

Image 28
Contents Smc PENTAX-DA Interchangeable Lens Foreword Using Your Lens Safely Precautions and Lens Maintenance CONTENTS3 Attaching the Lens Hood Precautions When Using the Lens with a Flash Features of the smc PENTAX-DA Lens Smc PENTAX-DA Lens About the DA lens mount KAF-mount KAF2-mount KAF3-mountAbout lenses with a supersonic motor Supersonic motor compatible camera bodyHow to Check and Update the Firmware Mounting and Removing the Lens To mount the lens on the camera bodyMemo To remove the lensLens CAP Attaching the dedicated lens cap to DA 40mm f/2.8 Limited Changing the Focus Mode FocusingFor the DA lens Using Autofocus Focusing with the OK ButtonDA 18-250mm f/3.5-6.3ED AL if Using Manual Focus Using the Quick-Shift Focus SystemHow to use the Quick-Shift Focus System Using AutofocusMemo DA 200mm f/2.8ED if SDM, DA 300mm f/4ED if SDM focusing Close-distance scale Zoom Lens About the zoom ring About the zoom lock switch Red lineMacro Lens Magnification ScaleAttaching the Lens Hood Screw-on Type DA 70mm f/2.4 Limited dedicated lens hoodLens hood attaching index Bayonet Type DA 21mm f/3.2 AL Limited dedicated lens hood About the PL filter window How to use the lens hood with polarizing filter window Built-in lens hood Precaution on filters FiltersPage Memo Circular polarizing filters and vignetting Compatibility table for Pentax circular polarizing filters SDM YES Memo Built-in Flash External FlashZDA 14mm f/2.8ED if ZDA 21mm f/3.2 AL LimitedZDA 12-24mm f/4ED AL if ZDA 16-50mm f/2.8ED AL if SDM zDA 16-45mm f/4ED ALCompatibility of DA Lenses with the Built-in Flash Compatibility Lens DA 50-200mm f/4-5.6ED Tripod Mount Camera position shift lock screw Tripod MountRemoving the Tripod Mount Main Specifications Lens DA 40mm f/2.8 Limited DA 70mm f/2.4 Limited 300mm equivalent to Lens DA 16-45mm f/4ED AL DA18-55mm f/3.5-5.6 AL DA 50-135mm f/2.8ED if SDM Statement of FCC Compliance Memo CE Mark is a Directive conformity mark of the European Union