Kodak GE680C user manual Item 7 Auxiliary Power Port

Page 11

GE680 User Manual

70-0026A-A

Item 7: AUXILIARY POWER PORT

This port is required to provide power to the camera.

This port provides threaded captivation of the power cable if required. The captivated cable mating connector is the Switchcraft 760K. This connector can be purchased from Prosilica or from http://www.digikey.com.

This port can accept from 5V to 17V DC with the inner conductor being positive power and the external conductor being ground. However the suggested nominal voltage is 12V and cameras are tested at 12V.

Cameras will normally include a power supply. However compatible power supplies can also be ordered separately from Prosilica (Prosilica P/N 02-8000A for North America or Prosilica P/N 02-8001A for a Universal supply).

THE CAMERA POWER SUPPLY OPERATES MOST EFFICIENTLY AT 12V.

Prosilica Inc.

9

Page 10 Page 12
Image 11
Page 10 Page 12
Contents November 1 ProsilicaTable of Contents Introduction PrecautionsWarranty Specifications BGR24, RGBA24, BGRA24 Supported FeaturesMM Deep Plcs TYP MechanicalConnections GE Series connection diagramItem 2 General Purpose I/O Port Item 1 Gigabit Ethernet PortItem 3 Mini-SMB Trigger Input GPOItem 6 Status LED Item 4 Mini-SMB Sync OutItem 5 Status LED Item 7 Auxiliary Power Port Identifying Debris Cleaning the SensorCleaning with Air Contact CleaningImage to Infinity Adjusting the C-mountLoosen Locking Ring Computer Interface Camera InstallationNetwork card main properties window Gigabit Ethernet Setup for WindowsNetwork card TCP/IP address Other Cabling Power ConnectionGigabit Ethernet Cabling GigE Viewer application window Installing GigE Viewer for TestingSystem Optimization Network card advanced settings Test the Camera with the Prosilica Viewer Trouble ShootingDriver Issues Check the Basics
Top Page Image Contents