Kodak GE680C user manual Gigabit Ethernet Cabling, Power Connection, Other Cabling

Page 17

GE680 User Manual

70-0026A-A

Figure 7. Turn off Firewall.

oReturn to the Gige Local Properties window as in Figure 5. Select the Advanced tab as in Figure 7 and disable the Firewall for this device. Click OK to save changes.

Gigabit Ethernet Cabling

All Gigabit Ethernet cabling and connectors should be CAT5E or CAT6 compatible. Cable lengths must not exceed 100 meters.

Power Connection

The camera requires a 12V DC power supply that can source a minimum of 500 mA of current. See the Connections section of this document for more information.

Other Cabling

The camera can be triggered either through the 12 pin general purpose connector or the mini- SMB input. The compatible cable connectors are specified in the Connections section of this document or contact Prosilica to purchase compatible cabling. Prosilica provides SMB-to-SMB or SMB-to-BNC cabling of varying lengths.

Prosilica Inc.

15

Page 16 Page 18
Image 17
Page 16 Page 18
Contents November 1 ProsilicaTable of Contents Introduction PrecautionsWarranty Specifications BGR24, RGBA24, BGRA24 Supported FeaturesMM Deep Plcs TYP MechanicalConnections GE Series connection diagramItem 2 General Purpose I/O Port Item 1 Gigabit Ethernet PortItem 3 Mini-SMB Trigger Input GPOItem 6 Status LED Item 4 Mini-SMB Sync OutItem 5 Status LED Item 7 Auxiliary Power Port Cleaning with Air Cleaning the SensorContact Cleaning Identifying DebrisImage to Infinity Adjusting the C-mountLoosen Locking Ring Computer Interface Camera InstallationNetwork card main properties window Gigabit Ethernet Setup for WindowsNetwork card TCP/IP address Other Cabling Power ConnectionGigabit Ethernet Cabling GigE Viewer application window Installing GigE Viewer for TestingSystem Optimization Network card advanced settings Driver Issues Trouble ShootingCheck the Basics Test the Camera with the Prosilica Viewer
Top Page Image Contents