Kodak GE680C user manual Network card advanced settings

Page 20

GE680 User Manual

70-0026A-A

Figure 10. Network card advanced settings.

oSet Maximum Frame Size or Jumbo Frames to the maximum possible value. A typical value is 9000. If the list contains a property called Receive Descriptors, then change this value to its maximum value. Select OK to save properties.

oFrom the main properties dialog as in Figure 9, make sure that only the Internet Protocol (TCP/IP) check box is selected then click OK. The card is now optimized for use with the Prosilica camera.

oOpen the viewer and set the PacketSize to 8228.

Prosilica Inc.

18

Image 20

Contents Prosilica November 1Table of Contents Introduction PrecautionsWarranty Specifications Supported Features BGR24, RGBA24, BGRA24Mechanical MM Deep Plcs TYPGE Series connection diagram ConnectionsItem 1 Gigabit Ethernet Port Item 2 General Purpose I/O PortGPO Item 3 Mini-SMB Trigger InputItem 6 Status LED Item 4 Mini-SMB Sync OutItem 5 Status LED Item 7 Auxiliary Power Port Cleaning the Sensor Cleaning with AirContact Cleaning Identifying DebrisImage to Infinity Adjusting the C-mountLoosen Locking Ring Camera Installation Computer InterfaceGigabit Ethernet Setup for Windows Network card main properties windowNetwork card TCP/IP address Other Cabling Power ConnectionGigabit Ethernet Cabling Installing GigE Viewer for Testing GigE Viewer application windowSystem Optimization Network card advanced settings Trouble Shooting Driver IssuesCheck the Basics Test the Camera with the Prosilica Viewer