Avaya LU250WAMP manual LUWMT1A

Page 10

Figure 8 : LUWMT1A Connection to RCA Jack on Amplifier

RCA Jack

Amplifier

LUWMT1A

 

LUWMT1A Connector An RCA jack is provided near the output terminal strip for connection to an LUWMT1A impedance matching transformer (Com Code 405891680). A 600-ohm, telephone level output signal can be obtained by plugging the RCA connector of the LUWMT1A into this jack and taking the output signal off of the LUWMT1A screw terminals (see Figure 8).

NOTE: For information on connecting Telephone Paging Amplifiers to the Lucent

PCM Paging System Zone Controller (model LUPCMALL), please refer to the

LUPCMALL instruction manual.

Output Cover Replacement When all output connections are made, remove the appropriate knockout on the input cover. Replace the cover and tighten the screws while dressing the wires through the knockout hole.

Page 10 of 12

Page 9 Page 11
Image 10
Page 9 Page 11
Contents Telephone Paging Amplifier 250-Watt Model Domestic and International Listings Contents Package Contents IntroductionInstallation MountingWiring Connections Input WiringMicrophone Cable Bridging Inputs Speaker Connection, Output Wiring LUWMT1A Indicators Operation
Top Page Image Contents