![](/images/new-backgrounds/1330505/33050563x1.webp)
RA7000 / ESA10000 High Availability Solution Kit for
NOTES
You MUST be root to proceed with the installation process.
The capital letter at the end of each script prompt represents the default response.
4.Run the shell script by issuing this command:
#/tmp/ha_install_hp.sh
The SWCC Failover Transition Module Installation Script will prompt you to make several selections regarding your specific cluster configuration options. For the seamless failover of the SWCC transition module agent, be prepared to provide the script with the following information as prompted:
∙name of root directory to place the SWCC software
∙subnet address of the cluster
∙dedicated IP address for the SWCC failover agent
(this is the IP address used by the SWCC client in order for you to configure and monitor the RAID subsystem within the cluster)
The installation of the SWCC Failover Transition Module in your cluster is now complete. Reference your (HP) Managing MC/ServiceGuard manual for procedures to test server failover, and to monitor and manage your cluster.