About This Guide
Chapter 2: Cabling the RAID Subsystem Cluster Components
This chapter describes the procedures for cabling a RAID subsystem to two HP host servers based on the cluster (SCSI) layout option selected in Chapter 1 of this guide. (Reference Appendix A if clustering more than two hosts or more than one RAID subsystem). It provides detailed illustrations of the cabling and termination required to support
Chapter 3: Software Setup Requirements for a Cluster
This chapter summarizes and describes, in sequence, each of the software setups required to establish a cluster environment between multiple
Appendix A: Cabling and Termination Required to Expand a Cluster
An expanded cluster is one in which more than two host servers are connected to a RAID subsystem on the same SCSI bus, or where a second RAID subsystem is added to the cluster on a separate SCSI bus. Appendix A provides the hardware cabling and termination, and highlights the software configurations required to expand a cluster.
Appendix B: De-Installing the SWCC Failover Transition Module
This appendix describes how to reverse the installation of the StorageWorks Command Console Failover Transition Module (agent) within a cluster.
ix |
