Vivitar Tripod/Video Equipment Set-up2 settings Functional Description, Set-up3 settings, EN-66

[Set-up2] settings

Item	Functional Description
USB Mode	Selects to choose one of the following modes for further settings.
	* PC / PictBridge
TV	Sets video output of the ViviCam 8400 for matching the video output system of
NTSC	the equipment that you are going to connect to the ViviCam 8400.
PAL	* PAL / NTSC
LCD Brightness	This sets the brightness of the LCD monitor.
	The adjustment range is from -5 to +5.
Auto Shut Down	If no operation is performed for a specific period of time, the power to the ViviCam 8400
	is automatically turned off. This feature is useful to reduce battery wear.
	* 2 Min. / 3 Min. / 5 Min. / Off
[Set-up3] settings
Item	Functional Description
Reset Number	Sets whether or not to reset the file number when you take photographs. This
1	creates a new folder. The captured images are recorded to the newly created
	folder from number 0001. If you want to reset the file number, be sure that no
	images are recorded in the internal memory or the SD memory card.
	* Yes / No
Set to Default	Returns all basic settings to the ViviCam 8400’s default settings. The time setting
D	will not be reset.
	* Yes / No
Version	This displays the current firmware version of the ViviCam 8400.
V.

EN-66