Vivitar Tripod/Video Equipment manual Appendix, EN-69

APPENDIX

„Troubleshooting Guide

Symptom	Possible causes		Solutions / Corrective Actions
The camera does not	* The batteries are depleted.		* Load new or fully charged batteries.
power on.	* The batteries are not oriented correctly.		* Ensure that the battery polarity is correct.
	* The battery cover is not closed properly.		* Close the battery cover correctly.
	* The AC power adapter (optional) is disconnected.		* Properly connect the AC power adapter.
The ViviCam 8400	* The function of Auto Shut Down in		* Set the option of Auto Shut Down to Off.
	(Setup) mode has been activated.		* Press the power button again or
suddenly powers down.
	* The batteries are depleted.		replace the batteries with a new or
			freshly charged set.
The image is not	* The ViviCam 8400 is in	(Play) mode.	* Rotate the mode dial to A , P , SCENE
captured when the	* Memory is full.		, Tv , Av or M.
shutter button is			* Transfer the desired files to your
pressed.			computer and then delete unnecessary
			files, or use a different memory card.
The flash does not fire.	* NO FLASH is selected in flash mode.		* Select a different flash mode.
	* The ViviCam 8400 is in Burst/AEB/		* Select [Single] in the capture mode .
	(Video) mode.
Continuous shooting	* The capacity of the built-in memory or		* Insert a new SD memory card.
is not possible.	SD memory card is full.
Cannot transfer files	* The USB cable is not connected securely.		* Check all connections.
over a USB connection.	* The USB driver is not installed.		* Install the USB driver on your computer.
	* The ViviCam 8400 is turned off.
			* Turn on the ViviCam 8400.

EN-69