Dynex DX-DA100502, DX-DA100501 manual Troubleshooting, Maintenance

Page 13

Dynex DX-DA100501 camcorder battery charger - combined.fm Page 13 Friday, October 28, 2005 2:54 PM

Troubleshooting

13

ABNORMAL BATTERY DETECTION

Your charger detects an abnormal battery pack by sensing the voltage. If it is too high or too low, or if the battery pack does not reach full charge status within 8 hours of charging, the charger stops the operation immediately and indicate the abnormal condition by flashing both the power and battery status indicator LEDs. Normal operation resumes when the faulty battery is removed.

Troubleshooting

Problem

Possible causes and solutions

 

 

No indicator lights

• Confirm that the AC Adapter is firmly connected at

 

both ends (wall and power input jack)

 

• Confirm that the power outlet is functioning normally

 

• Confirm that the car cord is firmly connected at both

 

ends (cigarette lighter socket and power input jack)

 

• Confirm that the cigarette lighter socket is

 

functioning normally

 

 

Power light only

• The battery is fully charged *

 

• The battery is mounted incorrectly, remove and

 

remount the battery

 

• Clean the battery and charger contacts

 

• The battery may be defective*

 

 

Power and battery status LEDs both blinking

Defective battery*

 

 

Hissing noise while charging

Normal operation due to advance switching

 

circuitry

 

 

*To determine if the battery is overcharged or defective, place it on the camcorder or digital camera and turn it on. If the camcorder or digital camera does not turn on, the battery is probably defective. If the camcorder or digital camera does not operate, leave the power turned on for 30+ minutes, then remove the battery and put it on the charger. The charger should go into charge mode, indicated by the green blinking charge status indicator.

Maintenance

If the charger must be cleaned, make sure it is unplugged, and then wipe the body of the charger with a clean cloth lightly dampened with mild detergent. To clean the metal contacts, use a clean cloth lightly dampened with rubbing alcohol.

Page 12 Page 14
Image 13
Page 12 Page 14
Contents User Guide Guide DE L’UTILISATEUR Guía DEL Usuario DX-DA100501/DX-DA100502Contents Dynex DX-DA100501/502 battery charger IntroductionImportant safety instructions Features FeaturesProduct components Battery chargerAdapter plate a Adapter plate CTo operate the charger in a horizontal position Setting up the chargerTo operate the charger in a tilted position Connecting your charger to a power source Using the chargerTo use with an standard AC power outlet To operate the charger in the vertical positionTo use with a 12 V DC car power connector Using the chargerTo mount the battery into the charger Mounting the battery into the chargerTo install the adapter tray onto the charger Using AN Adapter TrayJVC BN-306, BN-V312U Battery Positioning GuideMinolta NP-200, NP-400 Optex LI12, LI13, LI14, LI29, LI61, LI62Batteries Position Kyocera BP-800S, BP-1000SPentax D-L12, D-L17, D-L18 Olympus LI-10B, LI-12B, LI-10, LI-20BRicoh DB-43, DB-40 Fuji NP80, NP100 JVC BN-V101Automatic Battery Voltage Detection and Indication Charging the batteryMaintenance TroubleshootingTroubleshooting Warranty Specifications14Specifications Legal noticesTable des matières Chargeur de batterie DX-DA100501/502 de Dynex IntroductionInstructions de sécurité importantes Mesures de sécuritéCaractéristiques CaractéristiquesChargeur de batterie Description du produitDescription du produit Adaptateur a Adaptateur BPour utiliser le chargeur en position horizontale Configuration du chargeurPour utiliser le chargeur en position inclinée Connexion du chargeur à une source d’alimentation Fonctionnement du chargeurFonctionnement du chargeur Pour utiliser le chargeur en position verticaleFonctionnement du chargeur Pour installer la batterie dans le chargeur Installation de la batterie dans le chargeurPour installer l’adaptateur sur le chargeur Utilisation D’UN AdaptateurGuide DE Positionnement DE LA Batterie Utilisation DE L’ADAPTATEUR UniverselRadio Shack Optex LI27, LI41Sanyo UR-211 Fonctionnement du chargeurCharge de la batterie Pas de lumières témoin Problèmes et solutionsBatterie défectueuse Batterie clignotent Sifflement pendant la chargeGarantie EntretienEntretien Assistance technique 800 Avis juridiquesContenido Cargador de baterías de Dynex DX-DA100501/502 IntroducciónInstrucciones importantes de seguridad Precauciones de seguridadCaracterísticas CaracterísticasCargador de baterías Componentes del productoComponentes del producto Para operar el cargador en una posición horizontal Instalación del cargadorPara operar el cargador en la posición inclinada Conexión de su cargador a la fuente de alimentación Uso del cargadorUso del cargador Del cargadorPara usar con un conector de alimentación de 12 V CC auto Uso del cargadorPara instalar la batería en el cargador Instalación de la batería en el cargadorPara instalar la bandeja adaptadora en el cargador USO DE UNA Bandeja AdaptadoraGuía DE Posición DE Baterías USO DE LA Placa Adaptadora UniversalBaterías Posición Uso del cargador Indicación Y Detección Automática DEL Voltaje DE Batería Carga de la bateríaBatería defectuosa Solución de problemasBatería están parpadeando Detección DE Batería DefectuosaEspecificaciones MantenimientoGarantía MantenimientoNúmero de asistencia 800 Avisos legalesAvisos legales

DX-DA100501, DX-DA100502 specifications

The Dynex DX-DA100502 and DX-DA100501 are two versatile and reliable digital-to-analog converters designed to enhance audio experiences for consumers. Both models are ideal for connecting modern digital audio sources to traditional analog sound systems, making them perfect for use in home theaters, music systems, and other audio applications.

The DX-DA100502 is particularly noted for its high-resolution audio performance, delivering 24-bit/192 kHz audio conversion. This model allows users to enjoy crystal-clear sound quality, ensuring that even the most intricate musical details are preserved. With a compact design, the DX-DA100502 is easy to integrate into any audio setup, making it a great choice for those who value both functionality and aesthetics.

Similarly, the DX-DA100501 focuses on delivering an efficient and user-friendly experience. This model is equipped with multiple input options including optical, coaxial, and line-in connections, allowing users to connect various digital devices with ease. Its compatibility with a wide range of audio formats enhances flexibility, making it suitable for both music lovers and movie enthusiasts alike.

Both models utilize advanced digital signal processing technologies that reduce jitter and enhance overall sound quality. The built-in noise reduction features improve clarity by minimizing unwanted background noise, ensuring that listeners can fully immerse themselves in their favorite audio content.

Another characteristic that distinguishes these converters is their robust build quality. Each model features a sturdy construction that not only enhances durability but also reduces interference from external sources. This makes them dependable components in any audio chain.

The user-friendly interfaces of the DX-DA100502 and DX-DA100501 further contribute to their overall appeal. With easily accessible controls and clear indicators, both models are simple to operate, catering to users of all technical levels. Whether you're a seasoned audiophile or just starting your journey into high-quality audio, these converters offer an excellent solution.

In summary, the Dynex DX-DA100502 and DX-DA100501 digital-to-analog converters provide exceptional audio quality, versatility, and user-friendly operation. Their advanced technologies and characteristics make them ideal choices for enhancing any audio setup, ensuring a superior listening experience.
Top Page Image Contents