Introduction

The Daylab 35 Slide Printer allows you to make prints of 35mm slides onto Polaroid 31/4 x 41/4 in. peel-apart instant films.

The Daylab35 is easy to operate and offers such features as preset focusing, automatic exposure control, exposure adjustment, automatic film-development timing, and built-in color filters for creative effects. With the Daylab 35, you can explore a wide range of creative applications, including the Polaroid Emulsion and image Transfer processes.

Contact your Polaroid dealer for additional information.

If you need assistance on how to use the Daylab 35 Slide Printer or Polaroid films, or if you should have film-related questions, please call us toll-free

1-800-343-5000, Mon. Fri., 8 a.m. to 8 p.m. (Eastern Time) from anywhere in the U.S.A. Or, write to the Customer Care Center, Polaroid Corporation, 201 Burlington Road, Bedford, MA 01730.

The numbers throughout the text refer to the Daylab 35 illustrations on the pages at the back of the manual.

Parts (pg 13)

a Power supply

bFilm-holder dark slide/viewing panel

cColor-filtration controls

dSlide carrier

eReady indicator

f START button

gExposure-adjustment dial

hVlEW-OFF-PRINT switch

iFilm-processing-timer button

jFilm-processing-timer indicator

kFilm-type selection switch

I image-preview door

Note: The dark slide/viewing panel has a dual function. When fully inserted into the film holder, it serves as a dark slide by preventing accidental exposure of your film. Its white surface facilitates image composition when you project the slide image onto it with the VIEW lamp.