Polaroid 35 manual Table of contents

Page 2

1Introduction

2Loading film

3Connecting the power supply

3 Determining the processing time of the film

3 Setting the exposure control

5Setting the color-filtration controls

6Preparing to make a print

7Exposing the film

7 Processing the film

9 Possible problems, causes

10Warranty

10 For information or assistance

11 FCC Notice (U.S.A. only)

11 EMI Notice (Canada)

12 Parts and accessories

Illustrations

Pg 13, Parts & Film loading

Pg 14, Film Loading, controls & film processing

Pg 15, Trouble shooting

Refer to reference numbers in text

Image 2

Contents Page Table of contents Introduction 664 665 Loading filmOpen the film-holder door 2m Setting the exposure controls Connecting the power supplyPlug the Daylab 35 power supply Determining the processing time of the filmVIEW-OFF-PRINT switch If you want Add Subtract Setting the Color-filtration controlsCorrecting prints from color slides Preparing to make a print Orient your slide on the slide carrierExposing the film Processing the filmFrom the film holder Print either too light or too dark An image blurred. out of focusFogged print light image or no image at all An image printed backwardsAn oblong in the print20 WarrantyCurtain-shaped mark or broad streak For information or assistanceFCC Notice U.S.A. only EMI Notice CanadaThermometer IncludesHeavy-duty trays Print tongsPage