Polaroid M209 film processing timer, Turn on the camera, Set the camera controls, Electronic flash

Page 4

Polaroid M209 Camera

3

The film processing timer

To activate the timer:

Slide battery cover open to remove the protective battery insulator strip.

+

To set the timer:

Press and hold the MIN button and then the SEC button until the correct processing time is displayed (see film instructions for recommended times). The timer will always return to this setting after a processing cycle.

To reset the timer to a new time:

To reset it to a longer time than is displayed, simply press and hold the MIN and then SEC buttons until the new time is displayed. To reset it to a shorter time:

1.Press the MIN and SEC buttons simultaneously. The present time is cancelled and zero is displayed.

2.Press and hold the MIN button and then the SEC button until the new time is displayed.

To load/change the timer battery:

If the display or tone fade, or if the timer stops functioning, the battery should be replaced. The timer uses a single LR44 (or equivalent) battery.

Slide the battery cover open to remove the battery. Insert the new battery “positive” (+) side facing up. Then, replace the cover and reset the timer as described above.

Turn on the camera

Push the switch to “I” to turn on the power for the camera’s shutter, and flash unit.

Set the camera controls

Lens aperture:

Set aperture selector lever to 16. (Use lower number to brighten the image, use a higher

number to darken the image.)

The electronic flash

The flash unit is designed to provide even illumination and proper exposure. To turn on the flash, simply raise the flash head all the way up. The flash automatically turns off when the head is tilted fully down.

IMPORTANT: When the flash unit is in the fully raised position make sure the Flash Reflector is pointing directly toward the subject. If the flash reflector is pointing in the wrong direction rotate the Flash Reflector Knob so that the flash is pointing in the direction of the subject.

Note: The camera’s shutter will not work while the flash is recharging. The shutter will work only if the flash “Ready” indicator LED is illuminated.

Auxiliary flash units can be synchronized with the camera. Contact your local service center for further information.

Using the Viewfinder/Rangefinder

Look through the Viewfinder and align the top of the subject’s head and the bottom of the subject’s chin with the upper and lower horizontal reference lines, then align the subject’s nose with the dotted vertical line.

Be sure to use the Viewfinder/Rangefinder reference lines to “set up“ each portrait. This will ensure that all subjects are at the proper distance to produce the desired image size.

Image 4
Contents M209 User Guide Introduction Camera PartsAccessories Load the batteriesLoading the film No white tab?film processing timer Using the Viewfinder/RangefinderTurn on the camera Set the camera controlsPhotographing children Taking the pictureProcessing the film Processing tips No large tab?Picture faults and probable causes Cleaning the Developer rollersService Limited Warranty U.S.A. only For more information

M209 specifications

The Polaroid M209 is a compact yet powerful camera that captures the essence of instant photography while incorporating modern technological advancements. Designed with both amateur and seasoned photographers in mind, the M209 combines classic Polaroid aesthetics with innovative features to enhance the shooting experience.

One of the standout features of the Polaroid M209 is its advanced autofocus system. This technology allows users to capture sharp, clear images quickly, even in challenging lighting conditions. The camera's lens is designed to excel in various settings, ensuring that subjects remain in focus whether shooting indoors or outdoors.

The M209 also boasts a remarkable image sensor that delivers stunning photo quality. With a high resolution, images produced by this camera exhibit vibrant colors and rich details. This is particularly beneficial for those who appreciate the nuances in their photography and wish to preserve moments with exceptional clarity.

Another significant aspect of the Polaroid M209 is its built-in editing tools. Users can enhance their images directly on the camera with filters, frames, and stickers, allowing for creative customization before printing. This feature makes the M209 not just a camera for capturing memories but also a tool for expressing artistic flair.

The Polaroid M209 embraces the convenience of instant printing, a hallmark of the Polaroid brand. With a single touch, users can print their favorite shots on high-quality paper, ensuring that memories are preserved in a tangible form. The printing process is fast, allowing users to share their photos with friends and family almost immediately.

In terms of connectivity, the M209 includes Bluetooth functionality, enabling seamless sharing and transfer of images to smartphones and other devices. This feature is particularly appealing in today’s digital age, where sharing photographs on social media platforms is part of the photographic experience.

Moreover, Polaroid's commitment to sustainability is reflected in the materials used in the M209’s construction. The camera is designed to be eco-friendly, promoting responsible photography and encouraging users to be mindful of their environmental impact.

Overall, the Polaroid M209 is an impressive blend of nostalgia and modern technology. Its combination of advanced features, ease of use, and instant printing capability make it a compelling choice for anyone looking to capture and share life's moments in a memorable and creative way. Whether for personal use, special events, or artistic exploration, the M209 stands as a testament to Polaroid's enduring legacy in the world of photography.